Thread lock solution
– – Fill the gap between the threads. Can be used as a replacement for a ring or pad.
– – The glue will prevent nuts or screws from falling off.
– – Prevent vibration – Prevent movement – or engine operation.
– – Prevents liquid – Prevents leakage.
– – Prevent rust
– With – Withstands continuous heat up to 150 C

Reagent 242
* * Blue, medium holding for workpieces or bolts to be removed or replaced.
Can be removed with common tools

Reagent 243
* * * Blue, medium holding strength Resistant to oil stains Can be removed with general tools

Reagent 263
* * Red color, high adhesion, resistant to oil stains Suitable for vibration conditions
Can be removed with heavy tools.

Reagent 271
* * * Red color, high holding strength, medium viscosity When the glue dries, it has a very high holding strength. Prevent vibration
Engines or machines Can be removed with heavy tools

Reagent 277
* * Red color, high holding strength, high viscosity, chemical resistance. Prevent rust and corrosion
It can be removed by high temperature and tool use.
– – Glue 277 recommended for people who want a permanent loosening –

How to use
1.Clean the spare parts to be used to apply the solution.
2. Turn the cap off, squeeze the desired screw glue to fit.
3. The glue will dry basically for about 20 minutes. The glue will set fully for 24 hours. (Depending on the weather and the environment)
4. After 24 hours The parts can be used normally.

Note:
– – It is ananarobic Glue (Anaerobic Glue) will harden or dry well in no weather and metal contact.