3/4 Inch DN20 Solar Heater Thermostatic Mixing for Valve TMV for Valve Ther

[“3/4 Inch DN20 Solar Heater Thermostatic Mixing for Valve for Valve Building Materials Standard Medium Pressure Thermostatic mixingnnWhat is the thermostatic mixing for valveA Thermostatic Mixing for Valve is a for valve that blends hot water with cold water to ensure constant, safe outlet temperatures preventing,scalding.They shut-off rapidly in the event of a hot or cold supply failure to prevent scalding or thermal shock.TMVs accurately control water temperatures for bathing, showering and hand-washing. They maintain pre-set temperatures – even if water pressure varies when other appliances are used. TMVs can be fitted under baths and basins, be part of,shower fittings, or as a feature of hot and cold water mixers.One way valvesTow inlets have one way valves,1 Fail-safe on Hot or Cold Supply Failure,2 Delivers Stable Mixed Water Temperature,3Extended Mix Temperature Range : 35-55 Celsius,4Idea for Domestic and Public Water Application,5Tamper-Proof CapnnTemperature setting range:38-45 CelsiusnHot water inlet temperature range55-80 CelsiusnCold water inlet temperature range5-29 CelsiusnMaximum working temperature99 CelsiusnTemperature stability:+/-2 CelsiusnPressure:Medium PressurenModel Number:nStandard or Nonstandard:StandardnTemperature of Media:Medium TemperaturenMedia:WaternActuator Mode:With InstructionnInlets: for M, Outlet: for MnFlow rate(1 kg pressure drop)26.67 L/minncolour:Silver + blacknMaterial:coppernsize:9.8*7.9*4.8cmnConnections: BSP,3/4 inch DN20nnPackage Contents:n1*Thermostatic mixing for valvennInstallation Precaution:n1All installations should be carried out by a Licensed Professional.n2Install in accordance with markings on for valve body. i.e. hot water inlet-marked H, cold water inlet-marked C.n3After temperature setting, if inlets temperature or pressure fluctuates, outlet temperature variation is within +/-2 Celsius.n4The external check valves at inlets prevent cross-flow of hot&cold water when inlets pressure is not the same.n5If the ratio between two inlets is too large, one flow-limiting for valve should be fixed at the side of higher pressure.n6Prior to installation, provisions should be made to flush the piping of any debris or other foreignnmaterials to ensure proper system operation.nOnly the above package content, other products are not included.nNote: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.”]