30ml-100ml Waterproof Strong Adhesive Spraying Invisible Brush Coating Waterproof Coating Leak Proof

Name: Invisible waterproof agent

Shelf life of 3 years

Storage: 3 years

Effect: Store in a cool and dry place

Waterproofing and leakage prevention at the construction site

Reference area: The overall coating of 250g is about 1.5 square meters in construction, and the coating of 600g is about 4 square meters in construction. Only the coating of gap 250 is about 3 meters in construction, and the coating of 600g is about 6.5 meters in construction

Construction precautions

1. Before construction, clean the tile floor and keep it free from dirt and sewage stains. If the gap between the tiles is too deep, first fill the gap with a leak stopper. The product does not need to be mixed, and can be brushed immediately after opening the cover. Before construction, the floor drain should be blocked to prevent glue leakage.

2. For large-scale construction, it is recommended to start with the wall and then the ground, and start from the inside to the outside to facilitate the exit of construction personnel. During construction, the gel should be brushed as thin as possible (faster drying of the film), and key areas (such as toilet edge leaks/corner gaps) should be coated twice (for better results). During construction, it should be completed in one go to form a continuous and flat waterproof film on the base surface.

3. After construction, it is recommended to ventilate the site. Before the gel is dried and solidified, it should not come into contact with water or step on. When the gel is at room temperature above 20C, it should dry after 2 hours and form a film after 5 hours. The curing time may be slower when the temperature is lower (the curing time may be affected by lower winter temperatures). Due to differences in coating thickness and environmental temperature, the curing time may vary slightly. The actual construction curing time shall prevail