Pioneer Pro Watertite Water-tite 101 All Purpose / Powerflex Cementitious Waterproofing – 4.5kg

Water-Tite 100 is designed to seal leaks in running water where conventional mortars would be washed away. Ideal for use in patching concrete mortars, repairing concrete pipe and pre-cast concrete, repairing honeycombs, crack and spalls, anchoring of bolts and fixtures, repairing water retaining structures, and filling holes.
How to Use:
– For surface preparation, surfaces should be brushed clean to remove loose material, dust, and laitance,
– Areas to be patched should be cut back to a depth of 20mm and given a good mechanical key. Feather edges must not be allowed.
– All surfaces must be damped with clean water prior to the application.
– Mixing proportion is 1 part water to 3 parts Water-Tite 100.
– Apply mixed Water-Tite in place ensuring maximum contact with the substrate. If being used to plug a running water leak, should be held in place until it reaches the initial set time.
– Due to rapid setting, use only the quantity which can be placed within the prescribed time.

PIONEER PRO WATER-TITE 101 ALL PURPOSE
Pioneer Pro Water-Tite 101 All Purpose is one-component cement based crystalline capillary, water-repellent, micro-mortar waterproofing system. The active chemicals are activated by water to produce insoluble crystals that penetrate concrete and block the substrate capillaries and hairline cracks. It is mixed with potable water to a slurry consistency and is applied for interior and exterior use in protecting masonry and concrete structures.
Key Features
• Integral waterproo ng chemistry
• Permanently active
• Very economical
• For internal and external applications
• For use in contact with potable water
• Waterproofs porous substrates
• Non- ammable
• Inorganic and environment friendly
Applications
Pioneer Pro Water-Tite 101 All Purpose can be applied on both new and old structures either on the water-retaining side or on the negative side. Pioneer Pro Water-Tite 101 All Purpose is recommended for the following typical
applications:
• Water treatment or sewage structures
• Basement walls
• Irrigation of tunnels
• Supporting walls and columns
• Tunnels, silos, water tanks
• Foundation slabs inside
• Underground garages
Application Procedure

PIONEER PRO WATER-TITE POWERFLEX CEMENTITIOUS WATERPROOFING
Pioneer Pro Water-Tite Powerflex is a one-component, flexible, fiber-reinforced polymer emulsion. The polymer base is mixed with cement to produce a flexible waterproofing membrane capable of resisting hydrostatic pressure and bridging hairline cracks.